Bolid Signal-10 Manual do Utilizador descarregar pdf (Página 5)

SIGNAL-20P DESCRIPTION

This Installer’s and User’s manual is intended to help for studying op-

erability principles and maintenance of SIGNAL-20P Intrusion&Fire Alarm

Addressable 20-Loop Control Device version 2.05.

Please read the instructions completely before connecting, operating

or adjusting this product.

1 DESCRIPTION

The multi-purpose Intrusion&Fire Alarm Addressable 20-Loop Control

Device SIGNAL-20P (hereinafter referred to as device) is designated for

usage as a part of integrated safety system to protect shops, pay-offices,

banks, establishments, plants and other objects from fire and intrusion

threats.

As the part of security system Orion headed either by S2000/S2000M

console or ARM Orion PC the device is intended to:

9 monitor up to 20 zones of burglary, fire, manual or auxiliary alarming

9 receive signals from auto and manual fire and burglary detectors both

powerless and loop supplied along with 4-Wired detectors regardless

of being normally opened or closed

9 control audible and visible alarms

9 communicate with net controller via RS-485 interface receiving com-

mands and transmitting the event messages

9 transmit the “Fire Alarm” and “Fire Trouble” messages to the Central

Fire Station

9 transmit alarming to the Central Surveillance Console

9 read the electronic identifiers with 1-Wire (µ-LAN) output interface,

e.g. Touch Memory identifiers

The device provides:

9 arming and disarming of specified alarm loops and some loop groups

by means of net controller commands

9 output relay local or centralized controlling

9 relay 4 (K4) and relay 5 (K5) connected line open and short failures

controlling

9 backup power supplying through the additional input

9 identifier code transmitting to the net controller for centralized parti-

tion controlling

9 indicating the partition status by facial LED

The device is supplied by one uninterruptible or one main and one

backup direct power sources with voltage from 10.2 to 28V. It is recom-

1 2 3 4 5 6 7 8 9 10 ... 56 57

Sem comentários

Bolid Signal-10 Manual do Utilizador Página 5