Bolid Signal-10 Manual do Utilizador descarregar pdf (Página 6)

Orion ISS

The Signal-10 Intrusion and Fire Alarm Panel (hereinafter referred to as the Signal-10 or the device)

is intended to be used in cooperation with an Orion network controller (an S2000М console or a per-

sonal computer with Orion Pro software installed) as a control and indicating equipment being part of

− Intrusion and Panic Alarm System,

− Fire Alarm and Extinguishing System,

− Announcement and Evacuation Management System.

The Signal-10 provides monitoring for up to 10 alarm loops with included detectors and initiating de-

vices. The ways to monitor for the alarm loops and the relevant parameters (“types” of the alarm

loops) are to be programmed while configuring the device individually for each alarm loop.

The Signal-10 also can operate in a standalone mode. In such case it works as single-component

control and indicating equipment (in an intrusion alarm system) which:

¾ Monitors up to 10 non-addressable alarm loops of the following types:

− Intrusion Alarm Loop (Type 4);

− Intrusion Alarm Loop with Tamper Monitoring (Type 5);

− Entrance Alarm Loop (Type 7);

− Panic Alarm Loop (Type 11);

− Auxiliary Alarm Loop (Type 6);

− Programmable Auxiliary Alarm Loop (Type 12)

¾ Controls two relay outputs without monitoring connected circuits;

¾ Controls two switch transistor outputs with monitoring connected circuits;

¾ Indicates individual states of alarm loops and troubles by its 11 built-in LEDs;

¾ Supports arming / disarming its alarm loops by means of electronic credentials (iButtons and

proximity cards) via the connected external reader;

¾ Enables operating a group of its alarm loops simultaneously;

¾ Provides storing in its memory up to 85 credentials along with their rights to operate alarm

loops;

¾ Is powered by one or two unrelated external DC power supplies;

¾ Is equipped with a tamper switch.

Being a part of an Orion ISS, in cooperation with the Orion network controller (an S2000М console or

a personal computer with Orion Pro software installed) the Signal-10 represents a combined control

and indicating device and managing device.

www.bolid.com 6

1 2 3 4 5 6 7 8 9 10 11 ... 95 96

Sem comentários

Bolid Signal-10 Manual do Utilizador Página 6