Bolid Signal-10 Manual do Utilizador descarregar pdf (Página 81)

Signal-10 Programming

3 – Short Failure The external load circuit connected to the output is monitored for short

circuit failures

4 – Open and Short Failure The external load circuit connected to the output is monitored for open

and short circuit failures

By default, for relay outputs 3 and 4 the maximum level of trouble monitoring is set (the Monitor For

parameter is set to 4).

Relay ON/OFF Events

The Relay ON/OFF Events parameter can be set on individually for each relay output. If the parame-

ter is set on then alterations of output conditions are transmitted to a network controller. By default

this parameter is set off.

When all settings are completed, don’t remember to save them by loading to the device memory (us-

ing the

toolbar icon or Device

→

Write Configuration to This Device menu command).

81 www.bolid.com

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 95 96

Sem comentários

Bolid Signal-10 Manual do Utilizador Página 81